Belkin P73261 manual Connecting a VCR or Camcorder to USB VideoBus, Connecting a Camcorder

P73261/F5U206-MAC/US/man.qxd 1/7/00 5:23 PM Page 4

Connecting a VCR or Camcorder to

the USB VideoBus™

After installing the USB VideoBus™, you can now start connecting the VCR or camcorder to the USB VideoBus™. The following outlines the steps connecting the USB VideoBus™ to the VCR or camcorder:

1. Connecting a VCR

VCRs usually include either an S-video or RCA (depending on your VCR) video cable with the same connector on both ends, to allow connection of the VCR to a Television set. Please use this cable to connect your VCR to the USB VideoBus™.

1.Connect the Yellow RCA or S-video connector on one end of the audio/video cable to the "Video Out" connector on the VCR. Connect the Yellow RCA or S-Video connector on the other end of the Audio/Video cable to the appropriate connector on the USB VideoBus™.

2.If you want to capture sound as well, connect the Red and White RCA connectors on the included VideoBus™ audio cable to the left and right "Audio Out" connectors of the VCR. Connect the mini-stereo plug on the VideoBus™ audio cable to the microphone jack on the iMac™, G3 or G4.

2. Connecting a Camcorder

If your camcorder has RCA Video and Audio out connectors, please refer to the instructions above for connecting a VCR.

1.Most camcorders use a custom cable for Video and Audio output. Using the cable included with your camcorder, connect either the S-Video or Yellow RCA connector to the Yellow RCA connector on the Belkin USB VideoBus™.

4