Serial Plug-and-Play Device Detection

(continued)

1.Attach the serial device to the USB Serial Adapter.

2.Right-click the “My Computer” icon on your desktop.

3.Click “Properties” from the menu that appears.

4.Click the “Device Manager” tab on the System Properties page.

5.Click “Refresh”.

Your Plug-and-Play device should be detected and you may be asked for a device driver if it has not been previously installed. Follow the instructions that came with your serial device to complete the installation.

Using Non Plug-and-Play Devices

Adding Non-Plug-and-Play (Legacy) Devices

Non-Plug-and-Play devices must be added through the “Add New Hardware Wizard” in the “Control Panel”. Using this wizard, follow the installation instructions that came with your device.

24

Page 26
Image 26
Belkin P73277, F5U116 user manual Using Non Plug-and-Play Devices