Installation
3.With your computer on, your system will now detect your Hub and install the required driver support.
Important Note: High-speed hub drivers are included with most USB 2.0 PCI upgrade cards, and are preinstalled along with the PCI card drivers. If you purchased an upgrade card prior to the release of high-speed hub support, please check with your PCI card vendor for an updated USB 2.0 driver. The Belkin USB 2.0 driver supports all competitive cards based on the NEC host controller with the exception of Adaptec.
4.Plug the USB A connector of the USB device, or an additional hub, into any of the downstream ports of the Hub.
Important Note: When moving a device from one port on the Hub to another, it may be necessary to reinstall the USB drivers for that device.
