Belkin PF30 Step, Connect High-CurrentAudio Filter 8 second delay, Hookup and Installation

PureAV Power Console

Hookup and Installation

Step 4

Connect High-Current Audio Filter (8 second delay)

This outlet is specifically designed to filter out AC line noise while delivering maximum current to power-hungry amplifiers and other high- current audio components. The High-Current outlet is also equipped with an 8 second delay. This allows your high-current amplifier to turn on last and turn off first, avoiding that annoying “thump” from getting to your speakers and potentially damaging them. The High-Current outlet is “Switched” and is controlled by the “Switched” button on the front of the Power Console.

A. Attach PureAV power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the Power Console.

B.AMP - Connect your main amplifier power cord to the outlet labeled “AMP-delay”.

Note: You can connect any type of high-current audio component into the High-Current outlet. You are not limited to the components listed above.

9