Belkin PF30 user manual Step Connect Audio Components to the Audio Filter, Hookup and Installation

Hookup and Installation

Step 3

Connect Audio Components to the Audio Filter

The PureAV Power Console Model PF30 contains an isolated Audio Filter that is optimized to clean and condition the power to all of your audio components. The audio filter also isolates your audio components from connected video and high-current audio components. The Audio Filter outlets are “Switched” and are controlled by the “Switched” button on the front of the Power Console.

A.Attach PureAV power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the Power Console.

B.Tape – Connect your tape player power cord to the outlet labeled “Tape”.

C.CD – Connect your CD player power cord to the outlet labeled “CD”.

D.Receiver (Preamp) – Connect your receiver or preamp power cord to the outlet labeled “Receiver”.

Note: You can connect any type of audio component into the Audio Filter outlets. You are not limited to the components listed above.

PureAV Power Console

8