Belkin PF30 user manual Step Connect your Pay-Per-View/PhoneLine, Hookup and Installation

Hookup and Installation

Step 5

Connect your Pay-Per-View/Phone Line

Your PureAV Power Console comes equipped with Pay-Per-View/phone-line protection with a built-in splitter. These are standard RJ11 phone jacks and are labeled “Phone”.

A. Connect one end of your telephone cable to the wall outlet to which you normally connect your phone line. Connect the other end of your telephone cable to the Power Console Phone jack labeled “IN”.

B.Connect one end of the PureAV phone cable (included) to the Power Console Phone jack labeled “OUT”. Connect the other end of this cable to the Pay-Per-View phone jack on your DSS receiver.

C.To connect a telephone - Connect one end of another phone cable to the other Power Console Phone jack labeled “OUT”. Connect the other end of this cable to the telephone you want to use.

Note: We have included labels for the Phone IN and Phone OUT lines if needed for better organization.

PureAV Power Console

10