Troubleshooting
Power Console is not providing power
•Check to ensure that the Power Console is plugged into a properly grounded AC wall outlet. Some outlets require a wall switch to be turned on in order to deliver power to the outlet
•Too many devices may be plugged into the Power Console, which are overloading the unit and tripping the overload circuit breaker. The Power Console is not designed to handle current loads larger than 15 Amps
or 1800 watts. Try unplugging some devices and resetting the circuit breaker located on the end of the Power Console.
To reset the circuit breaker: Wait at least 10 minutes after the circuit breaker was tripped before attempting to reset the breaker. Press in the button located next to the power cord on the end of the unit to reset. Power should be restored to the outlets on the Power Console.
•Your components may be plugged into a “Switched” outlet and the outlet is not Switched On. Check to ensure that the Switched ON indicator on the Control Panel is illuminated. If the light is not illuminated, press the Switched button on the front of the Power Console unit until the Switched ON indicator is illuminated. You should now have power to all of the switched outlets.
•Your components may not be turned on. Power may be flowing from the Power Console, but if the power switch on your component is not turned on then your component cannot receive power. Turn on the power switch on your component.
•The Power Console is designed to stop delivering power to all outlets when the
•The Power Console may be defective. Call Belkin Customer Service for assistance.
Belkin PureAV Power Console
12
