Belkin PureAV Power Console
7
Hookup and Installation
Step 2
Connect Video Components to the Video Filter
The Belkin PureAV Power Console PF31 contains an isolated Video Filter
that is optimized to clean and condition the power to all of your video
components. The Video Filter also isolates your video components from
connected audio and high-current audio components.
A. Attach Belkin PureAV power cord labels to each component’s power
cord before you plug the cord into the corresponding outlet on the
Power Console.
B. VCR – Connect your VCR power cord to the outlet labeled “VCR”.
C. DVD – Connect your DVD power cord to the outlet labeled “DVD”.
D. Cable/Satellite – Connect your cable or satellite receiver power cord to
the outlet labeled “Cable/SAT”.
E. TV – Connect your TV or monitor power cord to the outlet labeled “TV/
Monitor”.
Note: You can connect any type of analog video component into any of
the Video Filter outlets. You are not limited to the components
listed above.