Adjusting your mount

After your TV is installed, you can adjust the tilt and horizontal position. The tilt knob carries the weight of the TV and must be tightened with the supplied Allen Key Tool (Y) after the desired position of the monitor is achieved. Tighten the tilt knob until the TV is firmly locked in position. Refer again to Figure 11 for information on locating each of these knobs.

Do not loosen the screw on the opposite side (see Figure 15) because it holds the tilt assembly together.

Figure 15

Figure 16

DO NOT

ADJUST KNOB

FROM THIS

LOOSEN

SIDE ONLY

SCREW

 

If you plan to adjust the position of your TV regularly, you can tighten the horizontal pan knob by hand (see Figure 16). To keep it in a permanently locked position, however, you need to tighten it with the supplied Allen key. Under no circumstances should you completely loosen and/or remove any of these knobs.

English

Page 18
Image 18
Bell'O 8160, 8165 manual Adjusting your mount