Bell'O 8160, 8165 manual Mounting the TV, View from Rear of TV

Mounting the TV

When you’re ready to put the Monitor Plate (MP) onto the Extension Arm (EA), get a friend or an assistant to help you lift the TV and guide the monitor plate onto the extension arm as shown in Figure 12.

After you’re confident that the TV with the Monitor Plate (MP) is properly seated into the Extension Arm (EA), you need to tighten the Security Screws (SS) using a Phillips-head screwdriver as shown in Figure 13. Because your TV is already attached to the extension arm, you need to work from above and behind the monitor to do this.

Figure 13

(View from Rear of TV)

Figure 12

MP

EA

SS

EA

After the TV is installed, carefully try to lift it off to make sure it is secure.

If it has been correctly installed, the TV should not move.

English