Belshaw Brothers BXC Smartbake manual Operation2, Operating conditions, Running Pre-set programs

Operation2

Operating conditions

For the most efficient operation, the following instructions must be followed. Failure to comply with these guidelines may affect the warranty.

šThe ambient temperature around the oven must not exceed 115“ F (40“ C).

šThe ventilation around the oven should be enough to ensure that there is no condensation on or around the oven from steam.

šIt is the customer’s responsibility to arrange for adequate ventilation and operational clearance at the back and sides of the oven to allow circulation of air.

Running Pre-set programs

1.Connect water ensuring there are no leaks.

2.Connect the power to a suitable outlet.

3.Turn on the oven by pressing the green button and the following screen will appear (Figure 2-1):

Figure 2-1

4.Press Button 4 (which corresponds to the “select product” option in Figure 2-1) and the program list will appear (Figure 2-2). If the oven has not been programmed, see the section on programming on page 3.

Figure 2-2

5.Highlight the desired program by pressing buttons 2, 3, 5, or 6 to scroll down, up, 10 down, or 10 up, respectively.

6.Start heating the oven by pressing button 4 for a ½ load bake or button 1 for a full load bake. The following screen will appear (Figure 2-3). To stop heating, press the stop/Back button at any time.

Figure 2-3

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

BXC Smartbake Oven MN-1881EN 5