Belshaw Brothers BXC Smartbake manual Programming the control panel

Programming the control panel

The BX Smartbake oven is capable of storing 99 preset bake settings. To program these settings into the oven, follow these instructions.

1.Press the Stop button to get to the first screen (see Figure 1-2).

Figure 1-2

2.Press button 2 for the pass code screen (see Figure 1-3).

Figure 1-3

3.Enter the pass code using the numbered buttons (default is 111111). The following screen will appear (see Figure 1-4).

Figure 1-4

4.Press button 1 for full bake set-up or button 4 for ½ bake set-up. All parameters for the program can now be set.

5.The oven is capable of six different phases per bake, and if fewer are required, the time can be left at 0 to leave that phase inoperative.

šTo move across the screen, press button 4.

šTo move back, press button 1.

šTo increase the value of the parameter, press button 3.

šTo decrease the value of the parameter, press button 2.

6.Program Title: To set the program title, press button 6 to go up the alphabet and button 5 to go down the alphabet.

When all parameters are complete, press Stop three times to save the setting. Repeat this process for each program required.

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

BXC Smartbake Oven MN-1881EN 3