30
Playing back recorded voice/FM files
The VOICE mode enables you to play back your recorded
voice files or FM radio programs. All voice recorded signals are
saved as WAV files with a filename such as MIC001.wav while
FM programs are saved with filenames such as FM001.wav.
The number at the end of the filename indicates the order in
which the signal was recorded. Use the following procedure to
listen to your recorded voice files.
1. Turn on the Joybee180.
2. Press the MODE button repeatedly to switch to VOICE
mode.
3. Press the key to play the current
file.
4. Use the or k eys to ski p to the
previous or next files. Press and hold
down the or keys to scan in
the reverse or forward direction.
5. Press to pause playback. Press the key again to
resume playback.
6. Press and hold the for 2 seconds
to stop playback and switch to file
list layout mode.
7. Use the buttons to
increase or decrease the volume as
desired during playback.The OLED
display shows the volume setting
when you change the volume.
The repeat play and equalizer functions are also available when you
play back a recorded signal. Refer to "Repeat play" on page 25 and
"Selecting an EQ mode" on page 26 for more details.
MIC003. WAV
VOICE
01/MIC001.WAV
02/MIC002.WAV
03/MIC003.WAV
VOICE
VOL 07
VOICE
VOL