BenQ CP220 Utilizing the password function, Setting a password, If you forget the password

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the on-screen menu. For details of the on-screen menu operation, please refer to "Using the menus" on page 32 for information.

WARNING: You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall.

Setting a password

CAUTION: Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started.

1.Open the on-screen menu and go to Setting > Password. Select On by pressing

	Left or Right on the projector or remote control.
2.	When the function is activated for the first
				Password Setup
	time, a prompt will display on the screen. Use		Enter Password
	the	Up or Down button to select a				0	0	0	0
			Press	to Confirm
	number for each digit of the password. Use
			Press	or	to change number
	the	Left or Right button to move
	between the digits of the password.		Press	or	to move

3.When all digits are entered and the password

is ready, press AUTO to confirm. A confirmation message displays.

• The password will display on-screen when being input.

•IMPORTANT: Write your selected password down here in this manual so that it is available to you should you ever forget it.

Password: __ __ __ __

Keep this manual in a safe place.

4.Perform one of the following 3 steps.

i.Press AUTO to continue. The set-up is finished when the message “Password

setup completed” displays.

ii.Press Up to go back to the previous screen and re-enter four digits.

iii.Press Down to cancel the

Password Setup

Do you want to use 0 0 0 0 as your password?

Yes No Cancel

password set-up and return to the on-screen menu.

If you forget the password

You will be asked to enter the four digit password every time you turn on the projector. If you enter the wrong password, the password error message displays. You can retry by pressing Up , or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure.

22 Operation