Safety Instructions (Continued)
12.Do not place this projector in any of the 13. Do not block the ventilation holes.
following environments. | - Do not place the projector on a blanket, | |
- Space that is poorly ventilated or confined. | bedding or any other soft surface. | |
Allow at least 50 cm clearance from walls | - Do not cover the projector with a cloth or | |
and free flow of air around the projector. | any other item. | |
- Locations where temperatures may | - Do not place inflammables near the | |
become excessively high, such as the | projector. | |
inside of a car with all windows rolled up. |
|
|
|
| |
- Locations where excessive humidity, dust, |
|
|
or cigarette smoke may contaminate |
|
|
optical components, shortening the |
|
|
projector’s life span and darkening the |
|
|
image. |
|
|
|
|
|
If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.
14. Always place the projector on a level, horizontal surface during operation.
- Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the projector when it is not fully horizontal may cause a malfunction of, or damage to, the lamp.
- Locations near fire alarms
- Locations with an ambient temperature above 40°C / 104°F
- Locations where the altitudes are higher than 10000 feet.
10000 feet
Important safety instructions | 3 |
