BENQ Corporation
Some lines occur at the bottom of | VHS tapes sometimes can't provide stable pictures when playing or |
pictures when playing VHS tapes. | pausing.And the unstable pictures may cause the LCD TV to display |
| incorrectly. If this situation happens, please press "i" key on the |
| remote controller to let the LCD TV check the signal again and |
| display the pictures correctly. |
The video picture is abnormal. | Press "i" key on the remote control to force the LCD TV to check |
| the signal system again and auto select the correct video system. |
Antenna:
The picture is not sharp or the picture | The reception may be weak. |
moves. | The state of the broadcast may also be bad. |
| Make sure the outside antenna is not disconnected. |
| Make sure the antenna is facing the right direction. |
The picture is doubled or tripled. | Make sure the antenna is facing the right direction. |
| There may be reflected electric waves from mountains or buildings. |
The picture is spotted. | There may be interference from automobiles, trains, high voltage |
| lines, neon lights, etc. |
| There may be interference between the antenna cable and power |
| cable. Try positioning them further apart. |
There are stripes on the screen or | Is the unit receiving interference from other devices? Transmission |
colors fade. | antennas of radio broadcasting stations and transmission antennas of |
| amateur radios and cellular phones may also cause interference. |
| Use the unit as far apart as possible from devices that may cause |
| possible interference. |
42 Troubleshooting
