Timing of replacing the light source
When the Light indicator lights up red or a message appears suggesting it is time to replace the light source, please consult your dealer.
The following light source warning displays will remind you to change the light source.
Status | Message | |
Install a new light source for optimal | Notice | |
performance. If the projector is normally run with | ||
| ||
Economic selected (See "Getting to know the | Order Replacement Light Source | |
light source hour" on page 49), you may continue | ||
Light source>XXXX Hours | ||
to operate the projector until the next hour light | ||
| ||
source warning appears. | Please contact your dealer for replacing new light | |
| source | |
Press ENTER to dismiss the message. | OK | |
|
| |
It is strongly recommended that you replace the | Notice | |
light source at this age. The light source is a | ||
| ||
consumable item. The light source brightness | Replace Light Source Soon | |
diminishes with use. This is normal light source | ||
Light source>XXXX Hours | ||
behavior. You can replace the light source | ||
| ||
whenever you notice that the brightness level has | Please contact your dealer for replacing new light | |
significantly diminished. | source | |
| ||
Press ENTER to dismiss the message. | OK | |
| ||
| Notice | |
| Replace Light Source Now | |
| Light source>XXXX Hours | |
| Light source usage time exceeded | |
| Please contact your dealer for replacing new light | |
| source | |
| OK | |
|
| |
The light source MUST be replaced before the | WARNING | |
projector will operate normally. | ||
| ||
Press ENTER to dismiss the message. | Out of Light Source Usage Time | |
| ||
| Please contact your dealer for replacing new light | |
| source | |
| OK | |
|
|
"XXXX" shown in the above messages are numbers that vary depending on different models.
Replacing the light source
Do not replace the light source by yourself. Please contact your dealer.
50 Maintenance
