BenQ MP526, MP576, MP575, MP525, MP515 manual Description of each menu

Description of each menu

Function

(Default setting/value)

Wall Color

(Off)

Aspect Ratio (Auto)

Keystone

(0)

1.
DISPLAYmenu	Position
	(0)
	Phase
	H. Size
	(0)
	Digital Zoom
	(1.0X)
	Picture Mode
2.	(Presentation)
PICTURE	Reference Mode
	(Dynamic)
menu	Brightness
	(50)
	Contrast
	(0)

Description

Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 33 for details.

There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 31 for details.

Corrects any keystoning of the image. See "Correcting keystone" on page 25 for details.

Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum.

This function is only available when a PC signal (analog RGB) is selected.

Adjusts the clock phase to reduce image distortion.

This function is only available when a

PC signal (analog RGB) is selected.

Adjusts the horizontal width of the image.

This function is only available when a PC signal (analog RGB) is selected.

Magnifies or reduces the projected image. See "Magnifying and searching for details" on page 31 for details.

Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 33 for details.

Selects a picture mode that best suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 34 for details.

Adjusts the brightness of the image. See "Adjusting Brightness" on page 34 for details.

Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 34 for details.

Operation 49