Setting the presentation timer
Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:
1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press Mode/Enter to display the Presentation Timer page.
2.Highlight Timer Period and decide the time period by pressing 
/ 
. The length of time can be set from 1 to 5 minutes in
3.Press 
to highlight Timer Display and choose if you want the timer to show up on the screen by pressing 
/ 
.
Selection | Description |
Always | Displays the timer on screen throughout the presentation time. |
|
|
1 min/2 min/3 min | Displays the timer on screen in the last 1/2/3 minute(s). |
|
|
Never | Hides the timer throughout the presentation time. |
|
|
4.Press 
to highlight Timer Position and set the timer position by pressing 
/ 
.
5.Press 
to highlight Timer Counting Direction and select your desired counting direction by pressing 
/ 
.
Selection | Description |
Count Up | Increases from 0 to the preset time. |
|
|
Count Down | Decreases from the preset time to 0. |
|
|
6.Press 
to highlight Sound Reminder and decide if you want to activate sound reminder by pressing 
/ 
. If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up.
7.To activate the presentation timer, press 
and press 
/ 
to highlight On and press Mode/Enter.
8.A confirmation message displays. Highlight Yes and press Mode/Enter on the projector or remote control to confirm. You will see the message “Timer is On!” displaying on the screen. The timer start counting at the time the timer is on.
Operation 37
