BenQ MP721C user manual Pro-Picture menu

Pro-Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION
(default	DESCRIPTION
setting / value)
Keystone (0)	Corrects any keystoning of the image. Refer to "Correcting keystone" on
	page 29 for more information.
	Automatically resizes the input signal pixel resolution to the native resolution
	of the projector.
	On: The pixel resolution of the input signal is converted to the native
	resolution of the projector (1024 x 768). For input signals with lower
Auto Resize	resolutions, gaps in the pixels are automatically interpolated into the image
	before being projected. This may distort the image clarity.
(on)	Off: If larger than the native resolution of the projector, the image is resized to
	fit within the display area. For input signals with lower resolutions, the
	projected image will display smaller than if resized to full screen. You could
	adjust the zoom setting or move the projector towards the screen to increase
	the image size if necessary. You may also need to refocus the projector after
	making these adjustments.
Aspect Ratio	There are three options to set the image's aspect ratio depending on your input
	signal source.
(Native)	See "Selecting the aspect ratio" on page 30 for details.
	Adjusts the horizontal position
H Position	of the projected image.
(0)
		-30		+30
	Adjusts the vertical position of
	the projected image.
V Position
(0)
					+30
			-30
Phase	Adjusts the video input clock to synchronise with
	the video signal. This helps reduce image distortion
(depends on
	produced by some PC video timings.
the selected
input
source)
H Size (0)	Adjusts the horizontal width of the image.

Operation 41