BenQ MS517 Optimizing the image, Selecting a picture mode, Setting the User 1/User 2 mode

Optimizing the image

Selecting a picture mode

The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type.

To select an operation mode that suits your need, you can follow one of the following steps.

•Press MODE/ENTER on the remote control

or projector repeatedly until your desired mode is selected.

•Go to the PICTURE > Picture Mode menu and press / to select a desired mode.

The picture modes are listed below.

1.Dynamic mode: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms.

2.Presentation mode (Default): Is designed for presentations. The brightness is emphasized in this mode.

3.sRGB mode: Maximizes the purity of RGB colors to provide true-to-life images regardless of brightness setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated camera, and for viewing PC graphic and drawing applications such as AutoCAD.

4.Cinema mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment.

5.User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2 mode" on page 35 for details.

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User 1/User 2) as a starting point and customize the settings.

1.Press MENU/EXIT to open the On-Screen Display (OSD) menu.

2.Go to the PICTURE > Picture Mode menu.

3.Press / to select User 1 to User 2.

4.Press to highlight Reference Mode.

This function is only available when User 1 or User 2 mode is selected up in the Picture Mode sub-menu item.

5.Press / to select a picture mode that is closest to your need.

6.Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details.

7.When all settings have been done, highlight Save Settings and press MODE/ ENTER to store the settings.

8.The confirmation message 'Setting Saved' displays.

Operation 35