Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:

1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ ENTER to display the Presentation Timer

page.

2.Highlight Timer Period and decide the timer

period by pressing / . The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in 5-minute increments.

3.Press to highlight Timer Display and choose if you want the timer to show up on the screen by pressing / .

Selection

Description

Always

Displays the timer on screen throughout the presentation time.

 

 

3 min/2 min/1 min

Displays the timer on screen in the last 3/2/1 minute(s).

 

 

Never

Hides the timer throughout the presentation time.

 

 

4.Press to highlight Timer Position and set the timer position by pressing / .

Top-Left Bottom-Left Top-Right Bottom-Right

5.Press to highlight Timer Counting Direction and select your desired counting direction by pressing / .

Selection

Description

Count Up

Increases from 0 to the preset time.

 

 

Count Down

Decrease from the preset time to 0.

 

 

6.To activate the presentation timer, press and press / to select On and press

MODE/ENTER.

7.A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is On” displaying on the screen. The timer starts counting at the time the timer is on.

Operation 39

Page 39
Image 39
BenQ MS517 user manual Setting the presentation timer, Selection Description, Top-Left Bottom-Left Top-Right Bottom-Right