BenQ MX812ST, MW811ST user manual Connection

Connection

When connecting a signal source to the projector, be sure to:

1.Turn all equipment off before making any connections.

2.Use the correct signal cables for each source.

3.Ensure the cables are firmly inserted.

•In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores.

•The connection illustrations below are for reference only. The rear connecting jacks available on the projector vary with each projector model.

Monitor	Notebook or desktop
	computer

A/V device

								Microphone
(VGA)	(DVI)
1	3	1	8
	2							Speakers	8 9
			11	4	8	5	6
								7
			10				or

RS-232

LAN

TYPE-A

USB

VIDEO

or

AUDIO-OUT

1.VGA cable

2.VGA to DVI-A cable

3.USB cable

4.Component Video to VGA (D-Sub) adapter cable

5.S-Video cable

6.Video cable

7.Audio L/R cable

8.Audio cable

9.Microphone

10.USB flash drive/USB wireless dongle

11.HDMI cable (MX762 ST only)

Connection 19