BenQ MX722 Securing the projector, Using a security cable lock, Utilizing the password function

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as the Kensington lock, to secure the projector. You can locate a Kensington lock slot on the rear side of the projector. See item 22 on page 9 for details.

A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock’s documentation for finding out how to use it.

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu.

WARNING: You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall.

Setting a password

Once a password has been set and the power on lock is activated, the projector cannot be used unless the correct password is entered every time the projector is started.

1.Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings menu. Press MODE/ENTER. The Security Settings page displays.

2.Highlight Change Security Settings and press MODE/ENTER.

3.	As pictured to the right, the four arrow keys		INPUT NEW PASSWORD
	( ,	, , ) respectively represent 4 digits
	(1, 2, 3, 4). According to the password you
	desire to set, press the arrow keys to enter six
	digits for the password.
4.	Confirm the new password by re-entering the
	new password.

Once the password is set, the OSD menu

returns to the Security Settings page.

MENU Back

5.To activate the Power On Lock function, press / to highlight Power On Lock

and press / to select On. When the Power On Lock function is activated, you have to enter the correct password to turn on the projector.

6.To activate the Web Control Lock function, press / to highlight Web

Control Lock and press / to select On. When the Web Control Lock function is activated, you have to enter the correct password to change projector settings via the Projector Network Display System.

IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __ __

Keep this manual in a safe place.

7.To leave the OSD menu, press MENU/EXIT.

Operation 23