14. Right/
Increases the projector volume.
When the
15.MODE/ENTER
Selects an available picture setup mode. Activates the selected
16.SOURCE
Displays the source selection bar.
17.MIC/VOL +/MIC/VOL -
Adjusts the microphone input sound level.
18.ASPECT
Selects the display aspect ratio.
19.MUTE
Toggles projector audio between on and off.
20.SMART ECO
Displays the Lamp Mode menu for selecting a suitable lamp operating mode.
21.TEST
Displays the test pattern.
22.Numeric buttons
Enters numbers in network settings.
Notes:
•Numeric buttons 1, 2, 3, 4 cannot be pressed when asked to enter password.
•The ECO BLANK and SMART ECO functions are not available on this projector.
Operating the LASER pointer
The Laser Pointer is a presentation aid for professionals. It emits red colored light when you press it.
The laser beam is visible. It is necessary to press and hold LASER for continuous output.
Do not look into the laser light
window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote control prior to using it.
The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and keep this remote control out of the reach of children.
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor(s) to function correctly. The distance between the remote control and the sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the projector that might obstruct the
• Operating the projector from the front | • Operating the projector from the top | ||||||
|
|
|
| A |
|
|
|
|
|
|
| p |
|
|
|
|
|
|
| pr |
|
|
|
A |
|
|
| o |
|
|
|
|
|
| x.+ |
|
| ||
p |
|
|
| 1 |
| ||
| pr |
|
|
| 5 | ||
|
|
|
|
| º | ||
|
| o |
|
|
|
| |
|
|
| x.+ |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 5º |
|
|
|
|
12 Introduction