BenQ PB7230 Remote Control Effective Range, Installing or Replacing Batteries, Push and open the

Models: PB7230

1 44
Download 44 pages 44.26 Kb
Page 14
Image 14
Remote Control Effective Range

Remote Control Effective Range

Infra Red (IR) remote control sensors are located on the front and the back of the projector. It can function in a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right angle to the remote sensors to function correctly. The distance between the remote control and the remote sensors should not exceed 6 meters (19.5 feet).

Installing or Replacing Batteries

1

Push and open the

2

Install batteries as

battery compartment

indicated by the

 

lid in the direction

 

diagram inside the

 

shown.

 

compartment.

3Position the lid over Installing or Replacing Batteries the compartment

and snap it back into place.

Avoid excessive heat and humidity. There may be danger of an explosion if batteries are incor- rectly replaced. Replace only with the same or equivalent type recommended by the manufac- turer. Dispose of the used batteries according to the manufacturer’s instructions.

10 Introduction

Page 14
Image 14
BenQ PB7230 Remote Control Effective Range, Installing or Replacing Batteries, Push and open the, battery compartment