Safety Instructions (Continued)
7.Do not block the ventilation holes.
-Do not place this unit on a blanket, bedding or any other soft surface.
-Do not cover this unit with a cloth or any other item.
-Do not place inflammables near the projector.
If the ventilation holes are seriously obstructed, overheating inside the unit may result in a fire.
8.Do not place this unit in any of the following environments.
-Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector.
-Locations where temperatures may become excessively high, such as the inside of a car with all windows rolled up.
-Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the projector’s lifespan and darkening the image.
-Locations near fire alarms
-Locations with an ambient temperature above 35°C / 95°F
9.Always place the unit on a level, hori- zontal surface during operation.
-Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the unit when it is not fully horizontal may cause a malfunction of, or damage to, the lamp.
10.Do not stand the unit on end verti- cally.
Doing so may cause the unit to fall over, causing injury or resulting in damage to the unit.
11.Do not step on this unit or place any objects upon it.
Besides probable physical damage to the unit, doing so may result in accidents and possible injury.
Important Safety Instructions | 3 |
