External Control Panel
9
3
1
2
10
11
4
5
8
7
6
1 Power
Press the Power key to turn the projector on or off.
2 Source
Sequentially select the signal sources
3 Left 4 Exit 5 Right 6 Menu
Menu will display the menu system on screen. Press Menu again to access the sub- menus. Left and Right help you navigate among choices and settings in the menus and
Press the Exit button to go back to the main menu. Press Exit again to leave the menu system.
7 Auto
Automatically determines the best picture timings for the displayed image.
8 Blank
Used to hide the screen image. You can press Blank again or Return to bring the image back.
9 Power indicator light
It will light up or flash when the projector is under operation.
10 Temperature warning light
The Temp indicator will flash when the sys- tem temperature is too high, which may occur if the projector is operated improperly. See "Temp Information" on page 29 for more detailed information.
11 Lamp indicator light
The Lamp Indicator will light up when the lamp needs service or replacement. See “Lamp Information” on page 27 for more detailed information.
Introduction 7