H |
FILTERS REMOVING AND REPLACING’S INSTRUCTIONS
1. METAL FILTERS
Open the panel (see picture H3). To remove the grease metal filter use the appropriate handle.
I |
LIGHTING ASSEMBLY AND REPLACEMENT
SPOTLIGHT
How to replace a square halogen light:
a)Check that the equipment is disconnected from the power supply.
b)Open the panel completely till 90° (see figure) pressing the PUSH button.
c)Replace the lamp with a similar one (halogen, max 20W, 12 Volt, G4 connec- tion).
d)Close the panel. If the panel does not close correctly repeat the operation at point b.
L |
MAINTENANCE AND CLEANING
Constant maintenance ensures the correct operation and efficiency of the appli- ance over time. Special attention should be paid to the metal
9