HALOGEN BULBS
This range hood requires two halogen bulbs (Type T4, 12V, 20W).
ALWAYS SWITCH OFF THE ELECTRICAL SUPPLY BEFORE CARRYING OUT ANY OPERATIONS ON THEAPPLIANCE.
To change bulbs:
1.Open the cover by prying from the proper slots. - DO NOT ROTATE. CAUTION:
BULB MAY BE HOT! Fig. 1
2.Replace with a Type T4, 12V, 20W bulb. Do not touch replacement bulb with bare hands!
FUSE REPLACEMENT
IF LIGHTS FAILTO OPERATE, DISCONNECT THE POWERAT THE SERVICE ENTRANCE. CHECK THE FUSE AND REPLACE IF NECESSARY.
1.Remove the decorative flue. Fig. 2
2.Remove the cover from the large electrical wiring box.
3.Locate the fuse holder. Unscrew its cap and remove the fuse.
4.Replace the fuse with the same size and amperage (5x20mm, 4amp, 125volt).
5.Reinstall the electrical box cover and decorative flue.
6.Reconnect power at the service entrance.
FIG. 1
DECORATIVE FLUE
FUSE
ELECTRICAL BOX
FIG. 2
- 5 -