1. INSTALL DUCTWORK
This exhaust hood is designed for use with gas or electric outdoor cooking appliances when operated in an outdoor covered patio or lanai area. As with all electrical appliances, this unit should be protected from the effects of weather as much as possible.
!WARNING
This unit is not designed for use with a charcoal grill.
The Best WPD28I model must be installed with the interior blower P12D only (sold separately). Other blowers cannot be substituted.
Plan where and how the ductwork will be installed.
Install 10” round galvanized steel ductwork, elbows and roof or wall cap for the type of blower you are installing. Use 2” duct tape to seal duct joints.
The minimum hood distance above cooktop must not be less than 30”. A maximum of 36” above cooktop is highly recommended for best capture of cooking impurities.
Run power cable to installation location.
!WARNING
The power cable must be a GFCI protected branch circuit.
ROOF CAP
10" ROUND DUCT
OPTIONAL
DECORATIVE
FLUE or SOFFIT 9" x 18" to 10"
ROUND TRANSITION
INCLUDED
HOOD
16 5/16" to
TOP OF WOOD 18"
MOUNTING STRIP
30" TO 36" ABOVE
COOKING SURFACE
HH0022A
OPTIONAL |
| WALL CAP |
DECORATIVE |
|
|
FLUE or SOFFIT |
|
|
9" x 18" to 10" ROUND |
|
|
TRANSITION INCLUDED |
| |
HOOD |
|
|
18" | 16 5/16" to |
|
TOP OF WOOD |
| |
|
| |
| ||
30" TO 36" ABOVE |
| |
COOKING SURFACE |
| |
HH0023A |
|
|
- 4 -