Best Data Products 56USBCXT To Prevent Static Discharge, Before You Begin, Package Contents·

Quick Start Guide

56USBCXT V.92 USB Modem

To avoid a shock hazard·

•Do not connect or disconnect any cables connected to this product during an electrical storm.

To Prevent Static Discharge

Discharge static-electricity from your body before you touch the product. You can discharge static electricity by touching the unpainted back part of the computer chassis.

Before You Begin

Have the following items available and be sure you meet the minimum system requirements before you install this modem.

Package Contents·

•56USBCXT V.92 USB Modem

•USB Cable

•Quick Start Guide

•Warranty Card & FCC Notice

•RJ-11 Telephone Cable

•Modem Installation CD

Minimum System Requirements

•PC Compatible with an available USB port

•Intel Pentium 266mhz or equivalent CPU

•Microsoft® Windows® 2000/XP

•CD-ROM Drive

•20MB Hard Disk Space Available

•64MB RAM

•Call Waiting telephone service required for Modem ON Hold feature.

Modem Installation

Before connecting the 56USBCXT modem we recommend removing any previous modem drivers, hardware, and software from your system. Insert the Best Data installation CD now

1.Turn on the power to your computer and wait for the desktop to appear.

2.Connect one end of the supplied USB cable into an available USB port on your system. (Note: A USB hub can also be used. The USB hub must be a powered USB hub.)

3.Connect the remaining end of the USB cable into the USB port on the 56USBCXT modem.

4.You will be notified that Windows found new hardware. Continue to the next step only if the found new hardware wizard appears. Do not continue if the wizard does not appear.

Instead you may want to try a different USB port to see if that may resolve the problem.

5.The Found New Hardware Wizard appears. Click No, Not At this Time and click Next.

6.Click Install the Software Automatically and click Next.

7.Click Continue Anyway.

NOTICE 1: Windows 2000 may inform you that the driver is not digitally signed. You must click YES to install the driver.

NOTICE 2: Windows XP may inform you that the driver has not passed Windows logo testing. You must click Continue Anyway to install the driver.

NOTICE 3: If you have Windows 2000 or Windows XP installed and receive either of the above posted notices please do not be concerned with the actual text of the message. The message only implies that Microsoft has not personally tested the drivers and approved them for use. However, Best Data has thoroughly tested the drivers prior to the release of the product.

8.Click Finish

Connect the Telephone Cable

Insert one end of the supplied telephone cable into the telephone line wall outlet and insert the opposite end of the cable into the connector marked RJ-11 on the back of the modem.

(Continued on next page...) (Continued on next page...)