Package Contents | EnGenius Technologies EOC5611P specification

1.3 Package Contents

Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the unit must be shipped in its original package.

1* Wireless Outdoor Access Point / Client Bridge (EOC5611P)

1* 24V/1A Power Adapter

1* Ethernet Cable

1* QIG

1* CD (User Manual)

2* 5dBi 5GHz Dipole Antennas

Auction: Using other Power Adapter than the one included with EOC5611P may cause damage of the device.

1.4 System Requirement

The following conditions are the minimum system requirement.

A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or Linux.

Internet Browser that supports HTTP and JavaScript.

1.5Hardware Overview

Hardware Specification

MCU/RF	Atheros AR2313+AR5112

Memory	32MB SDRAM

Flash	8MB

Physical Interface	1 x 10/100 Fast Ethernet RJ-45
	1 x Reset Button
	1 x Antenna Switch ( Internal and External Switch )
	2 x SMA Connector ( One is for 2.4GHz and another is for 5GHz )
LED indicators	Power/ Status
	LAN (10/100Mbps)
	WLAN (Wireless is up)
	3 x Link Quality (Client Bridge mode)
	• Green: Good Quality
	• Yellow: Marginally Acceptable Quality

	6

Image 7

EnGenius Technologies EOC5611P user manual Package Contents, System Requirement, Hardware Overview

Contents

EOC5611P Table of Contents Network Configuration Example Product Overview Feature Fully support all types of security types Wireless extensions to Ethernet networksWired LAN backup Training/Educational facilities Benefits System Requirement Package ContentsHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access Point WDS Bridge Client Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Station Separation Wireless SecuritySave / Cancel Suppressed Ssid Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings 3 WPA2-PSK WPA-PSK WPA-PSK Mixed Radius Secret 5 WPARadius Server Radius Port 6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced Settings Data Rate Transmit PowerProtection Mode Wireless Traffic Shaping Add Wireless → Wireless MAC FilterACL Mode MAC Address Filter Wireless → WDS Link Settings System → IP Settings LAN Settings System → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP IP Subnet Mask Internet Connection TypeAccount Name Domain NamePage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Service Name WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Password Keep Alive Connect on Demand WAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp Server Router → LAN Settings IPSec Pass Through Router → VPN Pass ThroughPptp Pass Through L2TP Pass Through Starting Port Router → Port ForwardingAdd Entry Protocol Status → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Name Management SettingsManagement → Administration Confirm Password Remote Management Remote UpgradePort Management Vlan ID Management → Management Vlan Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Local Log Management → LogSyslog Log Server IP Address Management → Diagnostics Access Point Network Configuration Example WDS Bridge Mode Client Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement