Client Router | EnGenius Technologies EOC5611P guide

Please refer to the last section to check Access point’s configuration.

Client Router

Step1	Login to the web-based configuration interface with default IP 192.168.1.1

Step2	Select your country or region’s regulation.

Step3	Select Operation Mode to Client Router from System Properties.

Step4	Change your Local Area Network setting to Obtain an IP Address Automatically.

Step5	802.11a/b/g wireless network.

Step6	Use site survey to scan Access Points that are available in nearby area.

Step7	Select the AP you would like to associate with.

Step8	Setup the authentication settings that match to the Access Point’s setting.

Step9	Setup your WAN connection type given by your Internet Service Provider from WAN
	Settings.

Step10	Press Apply to process all the configurations.

Auction: Client Router’s IP setting must match to the Access Point’s subnet.

63

Image 64

EnGenius Technologies EOC5611P user manual Client Router

Contents

EOC5611P Table of Contents Network Configuration Example Feature Product Overview Wireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security types Benefits System Requirement Package ContentsHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS Function Client Bridge WDS Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEP WPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret 6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius Accounting Transmit Power Protection ModeWireless Traffic Shaping Data Rate Wireless → Wireless MAC Filter ACL ModeMAC Address Filter Add Wireless → WDS Link Settings LAN Settings System → IP Settings System → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Internet Connection Type Account NameDomain Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service Name Connect on Demand Keep Alive WAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server Username Router → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass Through Router → Port Forwarding Add EntryProtocol Starting Port Information Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password Name Remote Management Remote UpgradePort Management → Management Vlan Management Vlan ID Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Management → Log SyslogLog Server IP Address Local Log Management → Diagnostics Network Configuration Example Access Point Client Bridge Mode WDS Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement