Data Rate | Select Data Rate from the drop down list. Data rate will affect the efficiency of the |
| throughput. If the data rate is set to a small number, the lower through will get but it |
| can transmit to longer distance. |
Transmit Power
Select Transmit Power to increase or decrease Transmit Power. Higher transmit power will sometimes cause unable to connect to the network. On the other hand, the lower transmit power will cause client unable to connect to the device.
Antenna | Select antenna waveform from Diversity, Vertical or Horizontal. |
|
|
Fragment Length | Specify package size during transmission. If large amount of client are accessing to |
| the network, specify small number of the fragment length in order to avoid collision. |
RTS/CTS Threshold
Specify Threshold package size for RTC/CTS. Using small number of the threshold will cause RTS/CTS packets to be sent more often to consuming more of the available bandwidth. In addition, if the heavy load traffic occurs, the wireless network can be recovered easily from interferences or collisions.
Protection Mode
Select Disable or Enable Protection Mode. If there are large amount of error occur during the transmission, please enable the protect mode otherwise protect mode should remain disable.
WMM | Select Disable or Enable WMM function. WMM is based on the four Access |
| Categories: voice, video, best effort and background. WMM function is not used to |
| guarantee transmission speed. |
Channel Bandwidth
Select Channel Bandwidth from the drop down list. Decrease channel bandwidth may cause lower throughput but less collision.
Distance | Specify distance rage between AP and Clients. Longer distance may lose high |
| connection speed. |
|
|
Wireless Traffic Shaping | Place a Check to enable Wireless Traffic Shaping function. |
|
|
Incoming Traffic Limit | Specify the wireless transmission speed for downloading. |
|
|
Outgoing Traffic Limit | Specify the wireless transmission speed for uploading. |
|
|
Auction: Changing Wireless Advanced Settings may cause insufficient wireless connection quality. Please remain all settings as default unless you have acknowledged all changing that you have made. Note: The Internal Antenna is only work for 5GHz wireless network. If you would like to use 2.4GHz wireless network, you must connected an External Antenna and switch the antenna types from the bottom of the device (Close to the Ethernet Port).
27
