WAN Settings → Dhcp Dynamic IP | EnGenius Technologies EOC5611P

6.1.2 WAN Settings → DHCP (Dynamic IP)

Select DHCP as your WAN connection type to obtain your IP address automatically. You will need to

enter Account Name as your hostname and DNS (Optional).

Internet Connection Type	Select DHCP to begin configuration of the DHCP connection.

Account Name	Specify Account Name that is provided by ISP.

Domain Name	Specify Domain Name that is provided by ISP.

MTU	Specify the Maximum Transmit Unit size. Suggest remain in Auto.

Get Automatically From	Select the Radio button for get the DNS automatically from DHCP server.
ISP

Use These DNS Servers	Select the Radio button for setup the Primary DNS and Secondary DNS servers
	manually.

Discard Ping on WAN	Place a Check to Enable or Disable ping from WAN.

	35

Image 36

EnGenius Technologies EOC5611P user manual WAN Settings → Dhcp Dynamic IP, Get Automatically From, Use These DNS Servers

Contents

EOC5611P Table of Contents Network Configuration Example Feature Product Overview Wireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security types Benefits Package Contents System RequirementHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS Function Client Bridge WDS Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEP WPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret 6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius Accounting Transmit Power Protection ModeWireless Traffic Shaping Data Rate Wireless → Wireless MAC Filter ACL ModeMAC Address Filter Add Wireless → WDS Link Settings LAN Settings System → IP Settings System → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP Internet Connection Type Account NameDomain Name IP Subnet MaskPage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service Name Connect on Demand Keep Alive WAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server Username Router → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass Through Router → Port Forwarding Add EntryProtocol Starting Port Information Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password Name Remote Upgrade Remote ManagementPort Management → Management Vlan Management Vlan ID Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Management → Log SyslogLog Server IP Address Local Log Management → Diagnostics Network Configuration Example Access Point Client Bridge Mode WDS Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement