Access Point with WDS Function | EnGenius Technologies EOC5611P

2 EOC5611P Multi-Function Instruction Guide

2.1 Access Point

In the Access Point Mode with WDS Function, EOC5611P function likes a central connection for any stations or clients that support IEEE 802.11a/b/g network. Stations and Client must configure the same SSID and Security Password to associate within the range. EOC5611P supports 4 different SSIDs to separate different clients at the same time.

2.2 Access Point with WDS Function

EOC5611P also supports WDS function in Access Point Mode without losing AP’s capabilities. Configure others Access Point’s Wireless MAC Address in both Access Point devices to enlarge the wireless area by enabling WDS Link Settings. WDS function can support up to 8 different AP’s MAC addresses.

Auction: Not every Access Point device has support WDS in Access Point Mode. It is recommended using EOC5611P if you would like to use this service.

8

Image 9

EnGenius Technologies user manual EOC5611P Multi-Function Instruction Guide Access Point, Access Point with WDS Function

Contents

EOC5611P Table of Contents Network Configuration Example Product Overview Feature Wired LAN backup Wireless extensions to Ethernet networksTraining/Educational facilities Fully support all types of security types Benefits Package Contents System RequirementHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access Point WDS Bridge Client Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Save / Cancel Wireless SecuritySuppressed Ssid Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings 3 WPA2-PSK WPA-PSK WPA-PSK Mixed Radius Server 5 WPARadius Port Radius Secret 6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced Settings Protection Mode Transmit PowerWireless Traffic Shaping Data Rate ACL Mode Wireless → Wireless MAC FilterMAC Address Filter Add Wireless → WDS Link Settings System → IP Settings LAN Settings System → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP Account Name Internet Connection TypeDomain Name IP Subnet MaskPage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel Login WAN Settings → PPPoE Point-to-Point Protocol over EthernetPassword Service Name Keep Alive Connect on Demand WAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp Server Router → LAN Settings Pptp Pass Through Router → VPN Pass ThroughL2TP Pass Through IPSec Pass Through Add Entry Router → Port ForwardingProtocol Starting Port Status → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management → Administration Management SettingsConfirm Password Name Remote Upgrade Remote ManagementPort Management Vlan ID Management → Management Vlan Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Syslog Management → LogLog Server IP Address Local Log Management → Diagnostics Access Point Network Configuration Example WDS Bridge Mode Client Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement