Wireless → Wireless MAC Filter | EnGenius Technologies EOC5611P

4.5 Wireless → Wireless MAC Filter

Wireless MAC Filters is used to Allow or Deny wireless clients, by their MAC addresses, accessing the Network. You can manually add a MAC address to restrict the permission to access EOC5611P. The default setting is Disable Wireless MAC Filters.

0.

ACL Mode	ACL Mode can help to deny or allow certain Client to access the network. Select
	Disable, Deny MAC in the list or Allow MAC in the list from the drop down list.

MAC Address Filter	Specify the MAC address manually.

Add	Press Add to add the MAC address in the table.

Apply	Press Apply to apply the changes.

28

Image 29

EnGenius Technologies EOC5611P user manual Wireless → Wireless MAC Filter, ACL Mode, MAC Address Filter, Apply

Contents

EOC5611P Table of Contents Network Configuration Example Product Overview Feature Wired LAN backup Wireless extensions to Ethernet networksTraining/Educational facilities Fully support all types of security types Benefits Hardware Overview Package ContentsSystem Requirement Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access Point WDS Bridge Client Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Save / Cancel Wireless SecuritySuppressed Ssid Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings 3 WPA2-PSK WPA-PSK WPA-PSK Mixed Radius Server 5 WPARadius Port Radius Secret 6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced Settings Protection Mode Transmit PowerWireless Traffic Shaping Data Rate ACL Mode Wireless → Wireless MAC FilterMAC Address Filter Add Wireless → WDS Link Settings System → IP Settings LAN Settings System → Spanning Tree Settings WAN Settings → Static IP Router SettingsRouter → WAN Settings Account Name Internet Connection TypeDomain Name IP Subnet MaskPage Use These DNS Servers WAN Settings → Dhcp Dynamic IPGet Automatically From Apply / Cancel Login WAN Settings → PPPoE Point-to-Point Protocol over EthernetPassword Service Name Keep Alive Connect on Demand WAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp Server Router → LAN Settings Pptp Pass Through Router → VPN Pass ThroughL2TP Pass Through IPSec Pass Through Add Entry Router → Port ForwardingProtocol Starting Port Status → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management → Administration Management SettingsConfirm Password Name Port Remote UpgradeRemote Management Management Vlan ID Management → Management Vlan Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Automatically Get Date Management → Time SettingsManually Set Date Time Syslog Management → LogLog Server IP Address Local Log Management → Diagnostics Access Point Network Configuration Example WDS Bridge Mode Client Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement