Client Bridge, WDS Bridge | EnGenius Technologies EOC5611P manual

2.3 Client Bridge

In the Client Bridge Mode, the EOC5611P function likes a wireless dongle. Connected to an Access Point wirelessly and surf internet whenever you want. Using Site Survey to scan all the Access Point within the range and configure its SSID and Security Password to associate with it. Connect you station to the LAN port of the EOC5611P via Ethernet.

2.4 WDS Bridge

In the WDS Bridge Mode, the EOC5611P can wirelessly connect different LANs by just simply configure each other’s MAC Address and Security Settings. This mode is used when two wired LANs locate in small distance and want to communicate each other. The best solution is using EOC5611P wirelessly connect two wired LANs. WDS Bridge Mode can establish 16 WDS links. The connection diagram is like a Star.

Auction: WDS Bridge Mode is not function like Access Point. APs linked by WDS are using the same

9

Image 10

EnGenius Technologies EOC5611P user manual Client Bridge, WDS Bridge

Contents

EOC5611P Table of Contents Network Configuration Example Feature Product Overview Training/Educational facilities Wireless extensions to Ethernet networksWired LAN backup Fully support all types of security types Benefits System Requirement Package ContentsHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS Function Client Bridge WDS Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Suppressed Ssid Wireless SecuritySave / Cancel Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEP WPA-PSK 3 WPA2-PSK WPA-PSK Mixed Radius Port 5 WPARadius Server Radius Secret 6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius Accounting Wireless Traffic Shaping Transmit PowerProtection Mode Data Rate MAC Address Filter Wireless → Wireless MAC FilterACL Mode Add Wireless → WDS Link Settings LAN Settings System → IP Settings System → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Domain Name Internet Connection TypeAccount Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Password WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Service Name Connect on Demand Keep Alive WAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server Username Router → LAN Settings L2TP Pass Through Router → VPN Pass ThroughPptp Pass Through IPSec Pass Through Protocol Router → Port ForwardingAdd Entry Starting Port Information Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Confirm Password Management SettingsManagement → Administration Name Remote Management Remote UpgradePort Management → Management Vlan Management Vlan ID Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Log Server IP Address Management → LogSyslog Local Log Management → Diagnostics Network Configuration Example Access Point Client Bridge Mode WDS Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement