6 WPA2 | EnGenius Technologies EOC5611P manual

4.3.6 WPA2

WPA2 security mode is for 802.1x authentication. You must provide a RADIUS Server to check the

permission of access the network.

	Security Mode	Select WPA2 from the drop down list to begin the configuration.

	Encryption	Select Auto, TKIP or AES for Encryption type.

	Radius Server	Specify Radius Server IP Address.

	Radius Port	Specify Radius Port number, the default port is 1812.

	Radius Secret	Specify Radius Secret that is given by the Radius Server.

	Group Key Update	Specify Group Key Update Interval time.
	Interval	Specify Group Key Update Interval time.
	Interval

	Group Key Update	Specify Group Key Update Timeout time.
	Timeout	Specify Group Key Update Timeout time.
	Timeout

	Pairwise Key Update	Specify Pairwise Key Update Timeout time.
	Interval	Specify Pairwise Key Update Timeout time.
	Interval

	Radius Accounting	Select Enable or Disable Radius Accounting. The detail of Radius Accounting is at
		next section.

24

Image 25

EnGenius Technologies EOC5611P user manual 6 WPA2

Contents

EOC5611P Table of Contents Network Configuration Example Product Overview Feature Wired LAN backup Wireless extensions to Ethernet networksTraining/Educational facilities Fully support all types of security types Benefits System Requirement Package ContentsHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access Point WDS Bridge Client Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Save / Cancel Wireless SecuritySuppressed Ssid Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings 3 WPA2-PSK WPA-PSK WPA-PSK Mixed Radius Server 5 WPARadius Port Radius Secret 6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced Settings Protection Mode Transmit PowerWireless Traffic Shaping Data Rate ACL Mode Wireless → Wireless MAC FilterMAC Address Filter Add Wireless → WDS Link Settings System → IP Settings LAN Settings System → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Account Name Internet Connection TypeDomain Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Login WAN Settings → PPPoE Point-to-Point Protocol over EthernetPassword Service Name Keep Alive Connect on Demand WAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp Server Router → LAN Settings Pptp Pass Through Router → VPN Pass ThroughL2TP Pass Through IPSec Pass Through Add Entry Router → Port ForwardingProtocol Starting Port Status → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management → Administration Management SettingsConfirm Password Name Remote Management Remote UpgradePort Management Vlan ID Management → Management Vlan Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Syslog Management → LogLog Server IP Address Local Log Management → Diagnostics Access Point Network Configuration Example WDS Bridge Mode Client Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement