WPA Mixed | EnGenius Technologies EOC5611P instruction

4.3.7 WPA Mixed

WPA Mixed security mode is for 802.1x authentication. You must provide a RADIUS Server to check the permission of access the network.

	Security Mode	Select WPA Mixed from the drop down list to begin the configuration.

	Encryption	Select Auto, TKIP or AES for Encryption type.

	Radius Server	Specify Radius Server IP Address.

	Radius Port	Specify Radius Port number, the default port is 1812.

	Radius Secret	Specify Radius Secret that is given by the Radius Server.

	Group Key Update	Specify Group Key Update Interval time.
	Interval	Specify Group Key Update Interval time.
	Interval

	Group Key Update	Specify Group Key Update Timeout time.
	Timeout	Specify Group Key Update Timeout time.
	Timeout

	Pairwise Key Update	Specify Pairwise Key Update Timeout time.
	Interval	Specify Pairwise Key Update Timeout time.
	Interval

	Radius Accounting	Select Enable or Disable Radius Accounting. The detail of Radius Accounting is at
		next section.

Auction: WPA Mixed means it allow both WPA and WPA2 security types to establish wireless connection.

25

Image 26

EnGenius Technologies EOC5611P user manual WPA Mixed

Contents

EOC5611P Table of Contents Network Configuration Example Feature Product Overview Training/Educational facilities Wireless extensions to Ethernet networksWired LAN backup Fully support all types of security types Benefits Hardware Overview Package ContentsSystem Requirement Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS Function Client Bridge WDS Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Suppressed Ssid Wireless SecuritySave / Cancel Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEP WPA-PSK 3 WPA2-PSK WPA-PSK Mixed Radius Port 5 WPARadius Server Radius Secret 6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius Accounting Wireless Traffic Shaping Transmit PowerProtection Mode Data Rate MAC Address Filter Wireless → Wireless MAC FilterACL Mode Add Wireless → WDS Link Settings LAN Settings System → IP Settings System → Spanning Tree Settings WAN Settings → Static IP Router SettingsRouter → WAN Settings Domain Name Internet Connection TypeAccount Name IP Subnet MaskPage Use These DNS Servers WAN Settings → Dhcp Dynamic IPGet Automatically From Apply / Cancel Password WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Service Name Connect on Demand Keep Alive WAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server Username Router → LAN Settings L2TP Pass Through Router → VPN Pass ThroughPptp Pass Through IPSec Pass Through Protocol Router → Port ForwardingAdd Entry Starting Port Information Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Confirm Password Management SettingsManagement → Administration Name Port Remote UpgradeRemote Management Management → Management Vlan Management Vlan ID Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Automatically Get Date Management → Time SettingsManually Set Date Time Log Server IP Address Management → LogSyslog Local Log Management → Diagnostics Network Configuration Example Access Point Client Bridge Mode WDS Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement