Internet Connection Type | EnGenius Technologies EOC5611P guide

Internet Connection Type	Select Static IP to begin configuration of the Static IP connection.

Account Name	Specify Account Name that is provided by ISP.

Domain Name	Specify Domain Name that is provided by ISP.

MTU	Specify the Maximum Transmit Unit size. Suggest remain in Auto.

IP Address	Specify WAN port IP address.

IP Subnet Mask	Specify WAN IP Subnet Mask.

Gateway IP Address	Specify WAN Gateway IP address.

Primary DNS	Specify Primary DNS IP.

Secondary DNS	Specify Secondary DNS IP.

Discard Ping on WAN	Place a Check to Enable or Disable ping from WAN.

Apply / Cancel	Press Apply to apply the changes or Cancel to return previous settings.

Auction: If the router's MTU is set too high, packets will be fragmented downstream. If the router's

33

Image 34

EnGenius Technologies EOC5611P Internet Connection Type, Account Name, Domain Name, IP Subnet Mask, Gateway IP Address

Contents

EOC5611P Table of Contents Network Configuration Example Feature Product Overview Training/Educational facilities Wireless extensions to Ethernet networksWired LAN backup Fully support all types of security types Benefits System Requirement Package ContentsHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS Function Client Bridge WDS Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Suppressed Ssid Wireless SecuritySave / Cancel Station Separation Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEP WPA-PSK 3 WPA2-PSK WPA-PSK Mixed Radius Port 5 WPARadius Server Radius Secret 6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius Accounting Wireless Traffic Shaping Transmit PowerProtection Mode Data Rate MAC Address Filter Wireless → Wireless MAC FilterACL Mode Add Wireless → WDS Link Settings LAN Settings System → IP Settings System → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Domain Name Internet Connection TypeAccount Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Password WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Service Name Connect on Demand Keep Alive WAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server Username Router → LAN Settings L2TP Pass Through Router → VPN Pass ThroughPptp Pass Through IPSec Pass Through Protocol Router → Port ForwardingAdd Entry Starting Port Information Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Confirm Password Management SettingsManagement → Administration Name Remote Management Remote UpgradePort Management → Management Vlan Management Vlan ID Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Log Server IP Address Management → LogSyslog Local Log Management → Diagnostics Network Configuration Example Access Point Client Bridge Mode WDS Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement