EnGenius Technologies EOC5611P specification

4.After Press Edit, web should pop-out a window as below. You may enter your desire VLAN ID. Then, press Save to save the changes.

5.Wireless Network webpage should have display all the VID as below. If you would like to enable Wireless VLAN function, select the radio button of “Isolate all Profiles from each other using VLAN standard” and then press Apply to configure the changes.

Note: Any Wireless clients associated with SSID1 to SSID4 cannot access to the management page unless its Wireless VLAN ID is the same as the Management VLAN ID. Enable Profile Isolation will also deny the communication between different groups of VID.

Auction: If you would like to use 802.1 x authentications (WPA/WPA2/WPA-Mixed) with VLAN tagging, you must

enable Management VLAN. For more details, please follow the instruction below.

66

Image 67

EnGenius Technologies EOC5611P user manual

Contents

EOC5611P Table of Contents Network Configuration Example Product Overview Feature Fully support all types of security types Wireless extensions to Ethernet networksWired LAN backup Training/Educational facilities Benefits System Requirement Package ContentsHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access Point WDS Bridge Client Bridge Client Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Station Separation Wireless SecuritySave / Cancel Suppressed Ssid Client Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings 3 WPA2-PSK WPA-PSK WPA-PSK Mixed Radius Secret 5 WPARadius Server Radius Port 6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced Settings Data Rate Transmit PowerProtection Mode Wireless Traffic Shaping Add Wireless → Wireless MAC FilterACL Mode MAC Address Filter Wireless → WDS Link Settings System → IP Settings LAN Settings System → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP IP Subnet Mask Internet Connection TypeAccount Name Domain NamePage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Service Name WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Password Keep Alive Connect on Demand WAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp Server Router → LAN Settings IPSec Pass Through Router → VPN Pass ThroughPptp Pass Through L2TP Pass Through Starting Port Router → Port ForwardingAdd Entry Protocol Status → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Name Management SettingsManagement → Administration Confirm Password Remote Management Remote UpgradePort Management Vlan ID Management → Management Vlan Management → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Local Log Management → LogSyslog Log Server IP Address Management → Diagnostics Access Point Network Configuration Example WDS Bridge Mode Client Bridge Mode WDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement