ERROR CODES
No. | Error | Meaning of Error |
|
|
|
1 | ER01 | No power supply |
2 | ER02 | No cassette loaded |
3 | ER03 | Broken tape tab (unable to record) |
4 | ER04 | Beginning of the tape |
|
|
|
5 | ER05 | Tape end |
6 | ER06 | Problem with the tape, video input, or VCR mechanism |
7 | ER07 | Present time or timer program not yet set |
8 | ER08 | Alarm REC underway (unable to change setting) |
9 | ER09 | Unfeasible |
10 | ER10 | Incorrect command |
|
|
|
11 | ER11 | Incorrect parameter |
12 | ER12 | Overflow of the VCR’s command receive buffer |
13 | ER13 | Data not received correctly |
|
|
|
TESTING
INITIAL SYSTEM TESTING
Before using the newly installed surveillance system, do the following:
•Make test recordings at the
•Interrupt electrical power to check your installed power backup system (if applicable).
•On playback, verify picture quality and that you can see the time and date display under normal and alarm conditions.
REGULAR SYSTEM TESTING
•Every day check that the system is operating. Is the recording indicator lit? Does the counter display indicate movement? Does the monitor show proper camera sequenc- ing and time and date information?
•Check for recorded alarms. Multiple alarms could make the tape run out early. Make sure there is enough tape to record at least five minutes of alarm activity at the selected speed.
•Regularly verify picture quality and operation under normal and alarm conditions. Play a tape recorded recently under normal conditions, which also includes an alarm condition that you triggered manually.
•Regularly replace tapes (refer to Table C for a schedule). Check tapes for head scarring. Replace damaged tapes. Always store tapes in their boxes, away from magnetic fields, heat, direct sunlight, and dust.
68 | Pelco Manual C673M (2/01) |
