SAFEGUARDS, WARNINGS, CAUTIONS, AND CARE
WARNING: The included power cord is used for 120 VAC, 60 Hz. Never connect any outlet or power supply having a different voltage or frequency. If you are unsure of the type of power supply, consult your equipment dealer or local power company.
Observe the following WARNINGS before installing and using this product. Follow all warnings and instructions marked on the VCR.
Instructions
Read all the safety and operating instructions before operating the VCR. Keep the instructions for future reference. Follow all operating and use instructions. Heed all warnings on the equipment and in the operating instructions.
Tapes
Only video cassette tapes with the VHS mark may be used with this model.
Power Source and Power Cord
Do not damage the power
Installation/Servicing
Installation and servicing should be done by qualified service personnel only and conform to all local codes. Do not try to service the VCR yourself. Opening or removing covers may expose you to dangerous voltage or other hazards.
Damage Requiring Service
Unplug the VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions:
•When the power cord or plug is damaged.
•If liquid has been spilled or objects have fallen into the VCR.
•If the VCR does not operate normally when following the operating instructions.
Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may cause damage and will often require extensive work by a qualified technician to restore the VCR to normal operation.
•If the VCR was dropped or the cabinet damaged.
•When the VCR shows a distinct change in performance. This indicates a need for service.
Replacement Parts
Be sure the service technician uses only replacement parts Pelco recommends, or which have the same characteristics as the original part. Unauthorized substitutions may cause fire, electric shock, or other hazards.
Safety Check
When service or repair to the VCR is completed, ask the service technician to perform safety checks to ensure it is in safe operating condition.
Water/Moisture/Condensation
Do not use this VCR near water. It is designed for indoor use only and must not be installed where exposed to rain and moisture.
Do not place objects containing water, such as drinks, on top of the VCR.
If the VCR is exposed to a rapid increase in temperature (such as warming a cold room or after moving it from a cold location to a warm one), condensation may form on the tape transport mechanism inside the VCR. To prevent damage to the VCR or tapes, plug the VCR into the AC outlet and turn the power on for about two hours. Do not play back or record on the VCR during this time.
6 | Pelco Manual C673M (2/01) |
