ADJUSTING THE CLOCK
You can adjust the VCR’s clock on the front panel even when the VCR is turned off. (You can also enter time and date information through the First Time Set Up menu.) This function lets you enter the order of the time, month, day, and year. The hour time is entered twice due to daylight savings time.
To adjust the clock:
1.When the VCR and peripheral devices are turned off, press the MENU button for more than three seconds. The hour digits on the fluorescent display’s clock start flashing.
2.Turn the JOG dial to set the hour digits. (If the flashing item is the same as the current time, turn the SHUTTLE ring without turning the JOG dial.)
3.Turn the SHUTTLE ring right to make the
4.Turn the SHUTTLE ring right to make the
5.Turn the SHUTTLE ring right to make the month digits flash, and then turn the JOG dial to adjust. The month indicator (M) lights.
6.Turn the SHUTTLE ring right to make the day digits flash, and then turn the JOG dial to adjust. The day indicator (D) lights.
7.Turn the SHUTTLE ring right to make the year digits flash, and then turn the JOG dial to adjust.
8.Turn the SHUTTLE ring right. The VCR’s clock is now set.
9.Repeat steps 1 and 2, and then turn the SHUTTLE ring left to exit after the hour digits are entered the second time (for daylight savings time).
ADJUSTING TO THE EXACT SECOND
Set the clock as described previously, but set the minutes to one minute ahead of the time you are using as a reference. After step 7, turn the SHUTTLE ring right when the desired time reaches 00 seconds of the minute you have chosen.
24 | Pelco Manual C673M (2/01) |
