No. | Commands | Functions | Status After Normal | Explanation of Status |
|
|
| Execution |
|
48 | CA*#1 | Clear contents of timer program | RC#2EX#2 | Command received and carried |
|
| no. |
| out |
49 | DW*(1),*(2)#1 | Setting the special day of the week | Same as above | Same as above |
|
| *(1) : Start day of week | Cannot accept this |
|
|
| *(2) : End day of week | command when |
|
|
| 0=SUN, 1=MON, 2=TUE, 3=WED, | *(1) and *(2) are |
|
|
| 4=THU, 5=FRI, 6=SAT | the same number. |
|
50 | DW?#1 | Inquiry about the setting for the | RC#2DW*(1),*(2)#2 | *(1) : Start day of week |
|
| special day of the week |
| *(2) : End day of week |
|
|
|
| 0=SUN, 1=MON, 2=TUE, |
|
|
|
| 3=WED, 4=THU, 5=FRI, 6=SAT |
51 | AM**#1 | Alarm recording mode setting | RC#2EX#2 | Command received and carried |
|
| **=06, 18, 30 |
| out |
52 | AS1#1 | Inquiry about alarm recording | RC#2AM**#2 | **=06, 18, 30 |
|
| mode setting |
|
|
53 | AD*#1 | Alarm REC duration setting |
|
|
|
| * : 0=MAN1, 1=MAN2, 2=15S, 3=30S, | RC#2EX#2 | Command received and carried |
|
| 4=45S, 5=1M, 6=2M, 7=5M, 8=10M |
| out |
54 | AS0#1 | Inquiry about alarm REC duration | RC#2AP*#2 | *=Same as item 53 |
|
| setting |
|
|
55 | EM#1 | Emergency REC ON/OFF | RC#2EX#2 | Command received and carried out |
56 | EM0#1 | Emergency REC OFF | Same as above | Same as above |
57 | EM1#1 | Emergency REC ON | Same as above | Same as above |
58 | AS2#1 | Inquiry about emergency REC setting | RC#2EG*#2 | * : 0=OFF, 1=ON |
59 | TE*#1 | Tape end movement setting | RC#2EX#2 | Command received and carried |
|
| * : 0=STOP, 1=REWIND, 2=REPEAT, |
| out |
|
| 3=ALARM•PROT (protect) |
|
|
60 | FS0#1 | Inquiry about tape end movement | RC#2TE*#2 | *=Same as item 59 |
|
| setting |
|
|
61 | DM*#1 | Display mode setting | RC#2EX#2 | Command received and carried out |
62 | DM?#1 | Inquiry about display mode setting | RC#2DM*#2 | |
63 | CH0#1 | Set date character display size | RC#2EX#2 | Command received and carried |
|
| “SMALL” |
| out |
64 | CH1#1 | Set date character display size | Same as above | Same as above |
|
| “LARGE” |
|
|
65 | FS1#1 | Inquiry about date character display | RC#2CZ*#2 | * : 0=SMALL, 1=LARGE |
|
| size |
|
|
66 | CO*(1),**(2)#1 | Clock out setting | RC#2EX#2 | Command received and carried |
|
| *(1) : 0=REC, 1=T/L REC |
| out |
|
| **(2) : 01, 02, 03, 04, 05, 10, 15, 20, |
|
|
|
| 25, 30, 50, 60, 00 (output by field) |
|
|
67 | RO#1 | Inquiry about clock out setting | RC#2CD*(1),**(2)#2 | *(1),**(2) Same as item 66 |
68 | MO*#1 | Mode out setting | RC#2EX#2 | Command received and carried |
|
| * : 0=REC, 1=PLAY, 2=POWER, |
| out |
|
| 3=TAPE, 4=TAPE REMAIN, |
|
|
|
| 5=CLOCK ADJ |
|
|
69 | RM#1 | Inquiry about mode out setting | RC#2MR*#2 | *=Same as item 68 |
70 | CU*#1 | Call out setting *: 0=OFF, 1=ON | RC#2EX#2 | Command received and carried |
|
| Receive command only when |
| out |
|
| signal at CALL OUT terminal is |
|
|
|
| switched to active condition. |
|
|
71 | CU?#1 | Inquiry about call out setting | RC#2CU*#2 | * : 0=OFF, 1=ON |
72 | BL*#1 | Blue background setting | RC#2EX#2 | Command received and carried |
|
| * : 0=OFF, 1=ON |
| out |
73 | BL?#1 | Inquiry about blue background setting | RC#2BL*#2 | * : 0=OFF, 1=ON |
|
|
|
|
|
(Continued on next page)
Pelco Manual C673M (2/01) | 65 |
