RECORDING MODE
Pressing the REC/PLAY MODE button switches the recording mode in the following order:
•For
•For
Table D. Recording/Playback Times
Recording Mode |
|
|
2H* | 2:00 | 2:40 |
6H | 6:00 | |
8H | 8:00 | |
L18H | 18:00 | |
L24H | 24:00 | |
L30H | 30:00 | |
L40H | 40:00 | |
48H | 54:00 | |
64H | 72:00 | |
72H | 78:00 | |
96H | 102:00 | 104:00 |
120H | 162:00 | |
128H | 136:00 | |
160H | 168:00 | |
168H | 174:00 | |
224H | 232:00 | |
|
|
|
* Playback only
RECORDING CHECK FUNCTION
When the VCR is recording, press the REC CHECK button for more than 1.5 seconds and then release. The tape rewinds a little and then the VCR plays back the recording just made. When the tape reaches the spot where you pressed REC CHECK, the VCR starts recording again.
AUDIO RECORDING/PLAYBACK
Audio will not be recorded if cables are not connected to the AUDIO IN connector or the microphone is not connected to the MIC IN jack.
The 2H (playback only), 6H, and 8H modes and L18H, L24H, L30H, and L40H modes are for audio recording and playback on the linear track. Normal sound is played back only when a tape recorded in these modes is played back in its respective mode.
The lengthier the recording mode, the poorer the sound quality. In L30H and L40H modes, sound quality is such that speech can be heard.
REPEAT RECORDING
With this function, when the tape reaches its end during recording, the VCR rewinds the tape and starts recording again. Table E shows what happens automatically when the tape ends during recording.
1.Press the MENU button. The Main menu appears.
2.Turn the JOG dial to select CLOCK/FIRST TIME SET UP, and then turn the SHUTTLE ring right. The First Time Set Up menu appears.
3.Turn the JOG dial to select TAPE END, and then turn the SHUTTLE ring right.
4.Turn the JOG dial to select REPEAT or ALARM•PROT, and then turn the SHUTTLE ring right. Refer to Table E. The repeat indicator on the fluorescent display lights.
5.Press the MENU button. The day and time display appears on the screen.
38 | Pelco Manual C673M (2/01) |
