![](/images/new-backgrounds/1206439/206439113x1.webp)
ADDITIONAL FUNCTIONS AND FEATURES
COUNTER
TAPE COUNTER
A
COUNTER RESET
Press the COUNTER RESET button to reset the counter to 00000.
COUNTER MEMORY
The counter display is stored in memory when the power is turned off, so the same numbers are displayed when power is restored. (Refer to the Counter Memory Stop section for information and procedures for rewinding to 00000.)
MEMORY BACKUP IN CASE OF POWER FAILURE
NOTE: The backup is for memory
The VCR includes a
However, if the power cord is unplugged for a long period (more than one month), the time may be wrong. If so, set the clock again.
When ALARM REC DURATION in the Recording Set Up menu is set to MAN1 or MAN2 and the power fails during recording, the VCR may not return to the alarm recording mode when power is restored.
RESET BUTTON
If the VCR is not working correctly or is showing an unusual indication on the fluorescent display, you can press the RESET button on the rear panel with a pointed object. This sets the following default values and turns the VCR off:
• | Date and time | • | Counter display |
• | Alarm list | • | Recording mode |
• | Power loss list | • | Playback mode |
To restart the VCR, press the POWER button. Set the day and time.
EXTERNAL TIME CLOCK ADJUSTMENT
You can set the VCR’s clock to the nearest hour by connecting with an external clock. When two or more VCRs are connected together, the clock can be set to the first VCR’s clock. Make the following settings to all VCRs you want set to the clock. Refer to the Connecting for External Time Clock Adjustment section for connection instructions.
1.Press the MENU button. The Main menu appears.
2.Set ALARM REC DURATION on the Recording Set Up menu to other than MAN1.
3.Set MODE OUT on the Rear Terminal menu to CLOCK ADJ.
4.Press the MENU button. The day and time display appears.
HOW EXTERNAL TIME ADJUSTMENT WORKS
When the RST IN terminal is grounded at the rear panel, the clock is set to the nearest hour automatically. For example:
•When the display shows 11:29:59, the clock is adjusted to 11:00:00.
•When the display shows 11:30:00, the clock is adjusted to 12:00:00.
When more than two VCRs are connected and the first VCR’s clock is adjusted to the nearest hour, the additional VCRs will also be set to the nearest hour.
Pelco Manual C673M (2/01) | 57 |