RECORDING AFTER A POWER FAILURE
01-01-'97 WED
00:00:00 X L24
00476
After a power failure during manual, timer, or alarm recording, the VCR turns itself on when the power is restored and begins recording in the same mode as before the failure.
When power is restored, an “X” appears next to the present time on the screen for about a minute. The fluorescent display shows the power loss indicator (PL).
If there is a power failure during playback, the VCR will be in stop mode when power is restored.
Refer to the Power Loss List section for more information on viewing and clearing the list.
MAINTENANCE
POWER LOSS LIST
<MAINTENANCE> 
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALIZE POWER LOSS LIST CLEAR ALARM LIST CLEAR
<REPEAT REC TIMES> | 0 |
<ELAPSED TIME> 0H |
|
00477
Figure 24. Maintenance Menu
<POWER LOSS LIST>
01
00:00
00478
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING 
then POWER LOSS LIST will be cleared.
The Power Loss List displays up to three power failure start times. If more occurred, the first and last two start times will be displayed.
VIEWING THE POWER LOSS LIST
1.Press the MENU button. The Main menu appears.
2.Turn the JOG dial to select MAINTENANCE, and then turn the SHUTTLE ring right. The Maintenance menu appears.
3.Turn the JOG dial to select POWER LOSS LIST, and then turn the SHUTTLE ring right. The Power Loss List appears.
4.Press the MENU button. The day and time display appears.
CLEARING THE POWER LOSS LIST
1.Press the MENU button. The Main menu appears.
2.Turn the JOG dial to select MAINTENANCE, and then turn the SHUTTLE ring right. The Maintenance menu appears.
3.Turn the JOG dial to select POWER LOSS LIST CLEAR, and then turn the SHUTTLE ring right.
(If you change your mind at this point and want to exit the menu without clearing the list, skip to step 5.)
4.Turn the SHUTTLE ring left to clear the list. The Maintenance menu appears.
5.Press the MENU button.
Once the list is cleared, the power loss list indicator (PL) goes off.
00479
46 | Pelco Manual C673M (2/01) |
